kit and instructions

Signal Box Interior

These fittings are designed for use with the LSWR Signal Box but can be used with other models. Whilst they are Southern in style they could be used for other territories.

Kit contents: 32 Lever Frame (DIY customisable), Instrument Shelf, 2 x Standard SR Block Instruments and Bells, Signalling Diagram, Clock, Notice Board, Belfast Sink Unit, Romesse Stove, Table & Chair, Booking Desk & Train Register, Level Crossing Gate Operating Wheel, Tyer’s Key Token Instrument & Cupboard.

Required Skill Level: ADVANCED (Please see Home page for definition)

To purchase this kit please click the add to basket icon below.

!
004

Signal Box Interior Kit

Delivered as a .pdf data file.

When your payment has cleared at PayPal you will be shown the assembly instructions to download. The kit .pdf file will be delivered separately to your PayPal registered email address within 24 hours of cleared payment.

Our Build Materials Kit contains sticky backed paper and board, or you can supply your own materials. Complete material requirements are listed below.

DIY Material List

  1. Signal Box Interior Kit (.pdf file)
  2. 1 x A4 Sticky Back 1 Label Sheet (Recommended). Otherwise, 1 x 80g/m2 A4 Copier/Ink Jet White Paper and Paper Glue Stick.
  3. 1 x 0.75 A4 Grey Board*.
  4. Quick Drying PVA glue. (For grey board butt joints)

* Grey Board is a thicker form of cardboard, usually made from recycled material. Available from eBay.

Tool List

  1. Scalpel with either spare blades or sharpening stone
  2. Scissors
  3. Cutting Mat or Thick Card
  4. Metal mm rule
  5. Black felt tip pen
  6. Brown felt tip pen
  7. Variety of other colour felt tip pens (For levers)
  8. Tweezers or thin nosed electrical pliers (To aid assembly)
  9. Magnifying Glass