station building kit

Small Station Building

Based on Cliddesden Light Railway Station Building 1901-1934 (LSWR). An austere, corrugated iron structure. It would also pass as a station halt for a small platform, goods store or goods yard office. The decorated interior is partitioned for Booking Office with serving hatch, Waiting Hall and Goods Office.

Presented in brown & cream (LSWR) paintwork. For ease of assembly the design includes opaque window glass (photos below) but instructions are provided to make these transparent. Please note the entrance door, in a fixed open position, is very tall to accommodate large goods entry.

Footprint: 157 mm x 52.5 mm

Required Skill Level: BEGINNER (Please see Home page for definition)

Our Build Material Kit (below) contains sticky backed paper, board, and transparent film, or you can supply your own materials. Complete DIY material and Tool requirements are listed towards the bottom of this page.


Issue 2 (Nov. 2013) : Now supplied with built-in drain pipes.

To purchase this kit please click the add to basket icon below.


Station Building/Goods Store

Delivered as a .pdf data file.

When your payment has cleared at PayPal you will be shown the assembly instructions to download. The kit .pdf file will be delivered separately to your PayPal registered email address within 24 hours of cleared payment.

Small LSWR Station Building Material Kit


  • 2 x 750 micron (0.75 mm)  A4 Grey Board.
  • 3 x A4 Sticky Backed Paper for Ink Jet or Laser Printers.
  • 1 x 99 mm x 210 mm x 250 micron (0.25 mm) Transparent Sheet.

You still need to print the model kits yourself and source adhesives.

Some kits require additional, standard, A4 white print paper that you probably already have to hand (not included).

:   kg

DIY Material List

1. Station Building / Goods Store Kit (.pdf file)
2. 3 x A4 Sticky Back 1 Label Sheets (recommended) . Otherwise, 3 x 80 g/m2 A4 Copier/Ink Jet White Paper and Paper Glue Stick. 
3. 2 x 0.75 A4 Grey Board*
4. 1 x 80 g/m2 A4 Copier/Ink Jet White Paper
5. Paper Glue Stick
6. Quick Drying PVA glue. (For grey board butt joints)
7. 1 x clear acetate sheet or packaging for window glass (Ideally 250 micron, thinner is ok)
8. Artist Fixer Spray – To protect from moisture ingress if using water based ink

* Grey Board is a thicker form of cardboard, usually made from recycled material.
Available from eBay.

Tool list

1. Scalpel with either spare blades or sharpening stone
2. Scissors
3. Cutting Mat or Thick Card
4. Metal mm rule
5. Metal paper clip (about 1mm diameter)
6. Brown felt tip pen
7. Magnifying Glass

The Prototype

 on which this model is based.

water tower features